8
• SAE HIGH BEAM: All high beam lamps. Highest
intensity point is centered on the Horizontal /
Vertical axis.
• SAE LOW BEAM: All low beam lamps
manufactured prior to 1999. After 1999, some
vehicles could have headlamp patterns that are
VOR or VOL . The high intensity area is located
in the lower right hand quadrant.
• FOG LAMPS: All fog lamps the top of the high
intensity area is located 4 down and centered on the
Vertical axis.
NOTE: DO NOT use Visual Assist Meter
for alignment assistance for Fog
Lamps
• SAE LOW BEAM
VOR (Visual Optical Right):
Low beam lamps manufactured after 1999, some
vehicles. The high intensity area is located in the
lower right hand quadrant and the beam pattern is
aligned by placing the right upper portion of the
beam pattern on the Horizontal axis.
NOTE: Visual Assist meter can be used when
aligning this lamp type if the lamp is
switched to HIGH beam and aligned as
High beam procedure.
• SAE LOW BEAM
VOL (Visual Optical Left):
Low beam lamps manufactured after 1999, some
vehicles. The high intensity area is located in the
lower right hand quadrant and the beam pattern is
aligned by placing the left upper portion of the beam
pattern on the .4 Degree (2.096 ) Down Horizontal
axis.
NOTE: Visual Assist meter can be used when
aligning this lamp type if the lamp is
switched to HIGH beam and aligned as
High beam procedure.
4.4 ALIGNMENT OF HEADLAMP PROCEDURE
• Locate CVA 3
EZ approximately 12 inches from in
front of the lamp to be aligned.
• Position CVA 3
EZ in front of first lamp to be aligned.
• Align CVA 3
EZ to vehicle by aligning two points
under or above the hood with line in alignment mirror.
• Select headlamp pattern and press Visual Assist
Switch to lamp type, HIGH BEAM or LOW BEAM.
• While viewing aim screen and Visual Assist meter,
adjust headlamp to position that appears as graphic
illustration of headlamp pattern selected and Visual
Assist meter has reached its highest achievable
reading for that lamp.
NOTE: Graphics on aiming screen denote position
of lamp position in inches. Outer box
US Low Beam
VOR
Aim Area
V
H
H
V
US Low Beam
VOL
.4 Degree Down
(2.096 Inches)
Aim Area
HIGH
BEAM
LL
LL
OO
OO
WW
WW
BEAM
VISUAL ASSIST SS
SS
EE
EE
LL
LL
EE
EE
CC
CC
TT
TT
OO
OO
RR
RR
V
H
H
8 inches
4 inches
5. Adjust by Centering
the Inner Most
Colored Ring of Lamp
Pattern over circle
designated by selected
Beam Type Arrow and
the Visual Assist
Meter to Highest
Reading.
6. Move CVA 3 to Next
Lamp and Repeat
Steps 3 Through 5.
1. Position CVA 3EZ in
Front of first lamp to be
Aligned.
2. Adjust Floor Slope to
Recorded Bay Setting.
3. Square CVA 3 to
Vehicle by Aligning Two
Common Points with
Line in Sighting Mirror.
4. Press Visual Assist
Switch to Lamp Beam
Type.
Headlamp Ali
nment Procedure
Hi
h Beam
V
H
Fog Lamp
H
US Low Beam
(11 pages)
(14 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals